| MODEL |
FT630 |
FT540 |
| Application |
Cutting in mold for deep draw, precise trim tolerances products. |
Cutting in mold for deep draw, precise trim tolerances products. |
| Forming Method |
Pressure forming |
Pressure forming |
| Foming Direction |
Below sheet forming |
Below sheet forming |
| Sheet Width |
310~700 mm |
310~600 mm |
| Mold Size (mm) |
Max. 630 x 330
Min. 250 x 90 |
Max. 540 x 330
Min. 250 x 90 |
| Max. Depth of Draw |
155 mm |
130 mm |
| Clamping Tonnage |
70,000 N |
70,000 N |
| Shut-height |
719 mm |
599 mm |
| Platen Travel |
210 mm |
170 mm |
| Max. Cycle Speed |
35 cycles / Min. |
45 cycles / Min. |
| Platen Drive |
AC Servo drive ;
Cam linkage |
AC Servo drive ;
Cam linkage |
| Plug Drive |
AC Servo drive |
AC Servo drive |
| Sheet Index |
AC Servo drive Chain feed |
AC Servo drive Chain feed |
| Heat Tunnel Lenght |
1800 mm |
1800 mm |
| Heating Elements |
Ceramic |
Ceramic |
| Control System |
YASKAWA 2200 PLC with touch screen |
YASKAWA 2200 PLC with touch screen |
| Stacking System |
1. Retrieval arm automation.
2. Blowing Chute Stack for shallow containers.
3. Air discharge to Unscrambler or manual packaging. |
1. Retrieval arm automation.
2. Blowing Chute Stack for shallow containers.
3. Air discharge to Unscrambler or manual packaging. |
